연구 성과
연구 내용 > 연구 성과
논문집
Supercapacitor performance of porous nickel cobaltite nanosheets. Scientific Reports, 2020
Photocatalytic Performance Evaluation of Titanium Dioxide Nanotube-Reinforced Cement Paste. Materials, 2020
매크로 합성 섬유를 혼입한 철근슬래브의 휨 강도평가. 대한건축학회 학술발표대회 논문집, 2020
Hysteretic Behavior of Reinforced Concrete Coupling Beams According to Volume Fraction of Steel Fiber. Sustainability, 2020
Seismic Performance of Existing RC StructuralWalls Retrofitted in Flexure by Wall End Plate. Sustainability, 2021
Tribo-mechanical properties evaluation of HA/TiO2/CNT nanocomposite. Scientific reports, 2021
Effects of Titanium and Carbon Nanotubes on Nano/Micromechanical Properties of HA/TNT/CNT Nanocomposites. Applied Surface Science, 2021
Flexural Strength of Composite Deck Slab with Macro Synthetic Fiber Reinforced Concrete. Applied Science, 2021
Temperature Effects on Local Structure, Phase Transformation, and Mechanical Properties of Calcium Silicate Hydrates. Journal of the American Ceramic Society, 2021
Deflection Estimation Based on the Thermal Characteristics of Composite Deck Slabs Containing Macro-Synthetic Fibers. Materials, 2021
Synergistic Effect of Carbon Nanotube/TiO2 Nanotube Multi-Scale Reinforcement on the Mechanical Properties and Hydration Process of Portland Cement Paste. Construction and Building Materials, 2021
매크로 합성 섬유를 혼입한 데크슬래브의 열적특성. 대한건축학회 학술발표대회 논문집, 2021
Instant mechanical recovery of heat-damaged nanosilicaincorporated cement composites under various rehydrations procedures. Materials and Structures, 2021
분리형 데크플레이트 고정장치 상세에 따른 시공 시 구조 안전성 평가. 대한건축학회 학술발표대회 논문집, 2021
Effect of Zirconia Nanotube Coating on the Hydrophilicity and Mechanochemical Behavior of Zirconium for Biomedical Applications. Surfaces and Interfaces, 2022
Structural effect of 3D printing resolutions on gauge factor of microcrack-based strain gauges for healthcare monitoring. Microsystems & Nanoengineering, 2022
Three-dimenstional printing-assisted all-in-one surfaces inspired by peristome structures for water-oil separation. Surfaces and Interfaces, 2022
One-step fabrication of superhydrophobic surfaces with wettability gradient using three-dimensional printing. International Journal of Precision Engineering and Manufacturing-Green Technology, 2022
Synthesis and Characterization of Polyethylene/B4C Composite, and its Neutron Shielding Performance in Cementitious Materials: Experimental and Simulation Studies. Cement and Concrete Composites
Feasibility Study on Utilization of Pulverized Eggshell Waste as an Alternative to Limestone in Raw Materials for Portland Cement Clinker Production. Construction and Building Materials
Facile Manufacturing of Capacitive Flow Meters Using Three-Dimensional Printing Technology for Rectifying Airflows. IEEE Access
Facile Microfabrication of Three Dimensional-Patterned Micromixers using Additive Manufacturing Technology. Scientific reports
Shear Strength Evaluation of Diagonally Reinforced Concrete Coupling Beams with Steel Fibers. ACI Structural Journal
Flexural Retrofit of Existing Reinforced Concrete Structural Walls with Various Boundary Element Details under Cyclic Loading. Journal of Building Engineering, 2022
Effect of magnesium silicate hydrate (M-S-H) formation on the local atomic arrangements and mechanical properties of calcium silicate hydrate (C-S-H) in MgCl2, Ca(OH)2, and SiO2 system: In situ X-ray scattering study. Cement and Concrete Research
Synergistic strengthening mechanism of Portland cement composites reinforced by triple-hybrid graphene oxide, functionalized carbon nanotube, and nano-silica: Correlation between the dispersion properties and mechanical performance. Cement and Concrete Composites
Characterization of Thermal Resistance and Mechanical Strength Recovery of Carbon Nanotube-incorporated Portland Cement Composites subjected to Heating and Rehydration: Visualization of Pore Structural Evolutions via Synchrotron 3D X-ray Nanoimaging. Cement and Concrete Research
3D Printing-Assisted Soft Capacitive Inclinometers for Simultaneous Monitoring of Tilt Angles and Directions. IEEE ACCESS, 2022
조립형 CFT 기둥의 리브 길이에 따른 중심 압축 성능. 콘크리트학회 논문집, 2022
반복하중을 받는 조립형 CFT 기둥의 리브길이에 따른 휨 성능 평가. 대한건축학회 논문집
반복하중을 받는 대각보강된 철근콘크리트 연결보의 강섬유 형상비와 혼입률에 따른 이력거동. 구조물진단유지관리공학회 논문집
반복하중을 받는 수직분할된 철근콘크리트 전단벽의 강성저감효과. 구조물진단유지관리공학회 논문집
A hybrid fabrication technique of capacitive flow meters using three-dimensional printing for rectifying airflows. IEEE ACCESS, 2022
학술 발표
산화그래핀-기능성 탄소나노튜브 복합체 합성 및 시멘트 내 혼입 시 물성에 미치는 영향. 한국건축시공학회 학술대회 논문집, 2020
핵자기 공명을 활용한 가열에 따른 나노실리카 혼입 시멘트 페이스트 내 칼슘실리케이트 수화물 구조 변화 해석. 한국건축시공학회 학술대회 논문집, 2020
TiO2 입자 크기 및 구조가 시멘트 페이스트 광촉매 효과에 미치는 영향. 한국건축시공학회 학술대회 논문집, 2020
RC슬래브와 데크슬래브의 온도분포변화에 따른 실험적 연구. 한국콘크리트학회 학술대회 논문집, 2020
조립형 CFT 기둥의 리브 길이를 고려한 유효폭 분석. 대한건축학회 학술발표대회 논문집, 2021
일반상세로 배근된 강섬유 보강 철근콘크리트 연결보의 거동특성. 대한건축학회 학술발표대회 논문집, 2021
삼중 나노소재 혼입 시멘트 모르타르의 강도특성. 한국콘크리트학회 학술대회 논문집, 2021
조립형 CFT 기둥의 콘크리트 응력-변형률 특성. 한국콘크리트학회 학술대회 논문집, 2021
내부 온도변화에 따른 데크슬래브의 휨 강도 특성. 한국콘크리트학회 학술대회 논문집, 2021
3D 프린팅 기술을 이용한 하이브리드 표면 제작. 한국신뢰성학회 학술대회 논문집, 2021
3D 프린팅 기반의 격자 구조를 이용한 용매 감지 화학센서 제작. 한국신뢰성학회 학술대회 논문집, 2021
국내 소성 점토를 활용한 석회석 시멘트(LC3)의 수화 반응성 연구. 한국건설순환자원학회 학술대회 논문집, 2021
나노실리카 혼입량 변화에 따른 시멘트 페이스트의 가열 후 역학 성능 회복 특성 분석. 한국콘크리트학회 학술대회 논문집, 2021
폴리에틸렌-탄화붕소 복합재 혼입 시멘트 페이스트의 중성자 차폐 성능 평가. 한국콘크리트학회 학술대회 논문집, 2021
합성 칼슘 알루미노실리케이트 수화물 (C-A-S-H)의 Al/Si 비율에 따른 원자 단위 구조 변화 및 기계적 특성 분석. 한국콘크리트학회 학술대회 논문집, 2021
나노소재의 혼입방법에 따른 모르타르 및 콘크리트의 기계적 특성. 한국콘크리트학회 학술대회 논문집, 2021
폴리에틸렌-탄화붕소 복합재 혼입 시멘트 페이스트의 중성자 차폐 성능 평가. 한국콘크리트학회 학술대회 논문집, 2021
합성 칼슘 알루미노실리케이트 수화물 (C-A-S-H)의 Al/Si 비율에 따른 원자 단위 구조 변화 및 기계적 특성 분석. 한국콘크리트학회 학술대회 논문집, 2021
나노소재의 혼입방법에 따른 모르타르 및 콘크리트의 기계적 특성. 한국콘크리트학회 학술대회 논문집, 2021
가력방법에 따른 조립형 CFT기둥의 휨거동 분석. 한국콘크리트학회 학술대회 논문집, 2021
강섬유 혼입률과 형상비에 따른 철근콘크리트 연결보의 거동특성. 한국콘크리트학회 학술대회 논문집, 2021
벽체형 마찰댐퍼가 설치된 RC골조의 내진성. 한국콘크리트학회 학술대회 논문집, 2021
탄소섬유 시트로 보강된 RC기둥의 유한요소해석. 한국콘크리트학회 학술대회 논문집, 2021
Strength Evaluation of Prefabricated CFTs with saw-toothed Ribs. ISSS 해외학술발표대회, 2021
리브의 길이에 따른 조립형 CFT 기둥의 변형능력 평가. 구조물진단유지관리공학회, 2021
삼중나노소재 배합방법에 따른 모르타르 및 콘크리트 강도 증진효과. 구조물진단유지관리공학회, 2021
엑스선 나노영상을 활용한 탄소나노튜브의 혼입이 화재 피해를 입은 시멘트 경화체의 강도회복특성에 미치는 영향 분석. 한국구조물진단유지관리공학회, 2021
TiO2 나노 튜브 함유 된 시멘트 페이스트의 기계적 물성 및 광촉매 성능 평가. 한국구조물진단유지관리공학회, 2021
그래핀 옥사이드 나노리본-기능화 탄소 나노 튜브-그래 핀 옥사이드 복합체 강화 시멘트 페이스트의 내화성에 관한 연구. 한국구조물진단유지관리공학회, 2021
탄소나노튜브와 나노실리카 이중 혼입 시멘트 페이스트의 내화성능 평가 및 메커니즘 규명. 한국콘크리트학회 학술대회 논문집, 2021
그래핀 옥사이드, 기능성 탄소나노튜브, 나노 실리카 삼중소재 보강 시멘트 페이스트의 전기전도적 특성 규명. 한국콘크리트학회 학술대회 논문집, 2021
그래핀 옥사이드, 기능성 탄소나노튜브, 나노 실리카 삼중소재 특성 분석 및 시멘트 페이스트 혼입 시 미치는 영향. 한국콘크리트학회 학술대회 논문집, 2021
삼중 나노소재 최적 분산 방안 및 최적 배합비 도출 연구. 한국콘크리트학회 학술대회 논문집, 2021
Fabrication of wedge-shaped single membrane water-oil separator. 대한기계학회, 2021
농도비와 경화 온도를 이용한 고분자 기반 탄성 퓨즈 시스템 제작. 한국정밀공학회, 2021
커튼월의 비구조요소 내진설계 절차와 방법에 대한 연구. 구조물진단유지관리공학회, 2021
매크로 합성섬유의 혼입량에 따른 콘크리트의 역학적 특성. 구조물진단유지관리공학회, 2021
수직분할된 철근콘크리트 전단벽의 전단보강 효과. 구조물진단유지관리공학회, 2021
리브 높이에 따른 조립형 CFT 기둥의 콘크리트 구속효과. 구조물진단유지관리공학회, 2021
특허
3D프린터를 활용한 마이크로 층상구조 패턴의 초발수 표면 구조체, 및 그 제조 방법. 소홍윤, 2021
화학물질을 감지할 수 있는 3D 프린팅 기반 격자 구조 폴리머와 제작 방법. 소홍윤, 2021
3D 프린팅 기술과 PLA의 유리전이 온도를 활용한 유연하고 민감한 압전저항형 센서 및 그 제조방법. 소홍윤, 2021
수상
한국건축시공학회 2020 가을학술발표대회, 최우수학술상, 서형원
한국건축시공학회 2020 가을학술발표대회, 최우수학술상, 유준성
한국건축시공학회 2020 가을학술발표대회, 우수학술상, 리패기
대한건축학회 2021 춘계학술발표대회, 우수발표논문상, 유별이
한국구조물진단유지관리공학회 2021 봄 학술발표회, 우수논문발표상, 손동희
한국콘크리트학회 2021 봄학술대회, 우수논문발표상, 김경률
기타
한국콘크리트 학회 2021 가을 학술대회 특별세션 운영 <한국연구재단 기초연구실 특별세션: 멀티스케일 건축재료 기반 다기능 콘크리트 개발>
한국구조물진단유지관리공학회 2022 봄 학술발표회 특별세션 운영 <한국연구재단 기초연구실 특별세션: 멀티스케일 건축재료 기반 다기능 콘크리트 개발>